Fish Dog Co - Fish Dog

Fishdogco

Cannon Speed-N-Temp Monitor
It's like having a spy in the murky depths. Now any downrigger can do more than just hold a weight at the end of a cable.

The new Speed-N-Temp™ Monitor from Cannon® has its own monitor for use with any downrigger on the market. Simply attach this informative accessory to any manual or electric downrigger and unlock the mysterious secrets of dark and deep trolling waters. The sealed underwater transmitter attaches to the cable of any downrigger just above the weight. The sensors on the Speed-N-Temp Monitor register the absolute depth of the lure and the lure¹s true speed as well as light intensity and water temperature at the lure's trolling location. These readings are then electronically transmitted up through the downrigger cable and digitally displayed on the Speed-N-Temp Monitor. Absolute depth of lure eliminates blow-back estimations and calculations that anglers normally must decipher. While the boat may be traveling at 2.5 mph, the lure may travel at different speeds depending on underwater currents.

With the Speed-N-Temp Monitor, true lure speed in tenths of mph can be adjusted by the angler providing optimum strike stimulation. A chartreuse and blue lure looks great in the sunlight but at a depth of 80 feet with filtered light the lure may look invisible to the fish. Speed-N-Temp Monitor measures light intensity and the appropriate lure color can be selected for the conditions at the trolling depth. Water temperature at the lure¹s depth is provided, crucial for tracking temperature sensitive fish. Using a standard cable, the Speed-N-Temp Monitor operates up to a maximum depth of 100 feet. A coated cable increases operation depth up to 300 feet. Speed-N-Temp activates when the speed wheel enters the water and automatically shuts off after 15 minutes of inactivity. A replaceable 9-volt battery powers the transmitter for up to 200 hours of operation. Battery voltage is also digitally displayed on monitor screen.

The use of Cannon¹s Speed-N-Temp Monitor will not interfere with downrigger features such as Short Stop, Positive Ion Control and Stacker Releases. The 7.2 square inch screen, with 2,300 pixels per square inch, provides an easy-to-read display of the transmitted information. Overall, the saltwater protected monitor measures 5 inches by 5.3 inches by 2.5 inches and can be easily mounted at any location on the boat. For the look of factory rigging, use the optional installation bracket and mount the monitor in the dash of the console.

Fish Hawk Thermo Troll - Model 840
With the Fish Hawk Thermo Troll #840, you know the downrigger water temperature and lure speed while trolling at depths from the surface to 200 feet. Works with all makes and models of downriggers. Easy installation. Known as "the one that works".

UNIVERSAL
works with
all models
Cannon
Riviera
Big Jon
Scotty
Penn
Walker
all makes & models

Find Fish...Most species of fish are temperature predictable. There are specific known preferred temperature zones that fish will sense and go to. Locate the correct temperature zones and you have access to active feeding fish. With the Fish Hawk 840 you know the water temperature at the surface and the depth of your lure while trolling to 200 feet deep.

Speed...Lure speed is the key to proper lure action and presentation. The Model 840 displays both the surface and downrigger lure speed. You can adjust your lure speed for wind, wave action, surface currents and underwater flowage to 200 feet of depth.

Computer Hi-Tech...The special sensors for the temperature and speed at the surface and the downrigger, continually relay data to the microprocessor. All information is displayed at the same time in large easy-to-read digits. Data can be displayed in Fahrenheit or Centigrade and MPH or Knots. The 840 also features in-use calibration capability, improved reliability and water sealing, and a new easy-open battery cap on the sensor.

Wireless Breakthrough...Easy installation. No modification at all - to any made or model downrigger ever created. Transmitting sensor simply snaps onto the downrigger cable. The downrigger wire is NOT used for transmission of data. Information is transmitted through the water vie telemetry (sonar).